DJI

DJI Zenmuse L3

Aerial LiDAR for corridors and canopy.
$21,890
In stock
  • Demo before you buy
  • 12-month Australian warranty
  • Express shipping Australia-wide

Book a time

Pick a time that suits you.

950 m

Returns off ten per cent at 950 metres

A 1535 nm laser reaches further and cuts through haze, so the aircraft can sit at 300 to 500 m and still put points on the ground.

107° FOV

Two 100 MP cameras, one pass

Dual 4/3 CMOS sensors behind a mechanical shutter cover 107° across, enough for the orthophoto and the elevation model off the same flight.

Confirm coverage before you leave site

Real-time SLAM draws the cloud on the controller as you fly, so a thin patch gets reflown while the crew is still there.

100 km² per day

One hundred square kilometres in a day

On the Matrice 400 at 300 m, a single flight covers 10 km². Across a working day with battery swaps planned, that is 100 km².

Overview

Discover DJI Zenmuse L3

Long Range, Wide Coverage
Long Range, Wide Coverage
Zenmuse L3 reaches 950 m detection at 100 kHz (100 klx, 10% reflectivity). Adjustable pulse rate adapts to scenarios. At 300–500 m altitudes, it delivers wide single-flight coverage and higher mapping efficiency.
Hardware Performance Redefined
Hardware Performance Redefined
Zenmuse L3 combines 1535 nm long-range LiDAR, dual 100MP RGB cameras, high-precision POS, and 3-axis gimbal in a compact form—unmatched performance for its size.
Small Spot, High Energy
Small Spot, High Energy
0.25 mrad beam divergence gives ~1/5 the spot size of L2, detecting fine objects like power lines/branches. Higher energy density boosts vegetation penetration and ground point density for accurate complex terrain reconstruction.
High Pulse Rate, Multiple Returns
High Pulse Rate, Multiple Returns
Up to 2M pulses/sec and 16 returns enable precise spatial reconstruction. Adjustable point cloud density and penetration suit both high-accuracy mapping and challenging environments.
Scanning Modes
Scanning Modes
Supports Linear, Star-Shaped, and Non-Repetitive scanning modes. Linear suits straight-line mapping; Star-Shaped excels in circular or point-of-interest surveys; Non-Repetitive optimizes coverage in complex or restricted areas.
107° Ultra-Wide FOV
107° Ultra-Wide FOV
Dual RGB cameras offer 107° horizontal FOV for broader coverage per shot. With just 20% LiDAR side overlap, capture both DOM and DEM data in one flight—greatly boosting efficiency.

Everything that ships with the kit you select.

Zenmuse L3

Zenmuse L3

Zenmuse Hardcase

Zenmuse Hardcase

Matrice 400 Single Gimbal for Zenmuse L3

Matrice 400 Single Gimbal for Zenmuse L3

 CFexpress Type B Card (1Tb)

CFexpress Type B Card (1Tb)

 CFexpress Type B Card Reader

CFexpress Type B Card Reader

Zenmuse L3 Lens Cap

Zenmuse L3 Lens Cap

L3 Insert for M400 Case

L3 Insert for M400 Case

Zenmuse L3 Gimbal Dampener Pack

Zenmuse L3 Gimbal Dampener Pack

Tool Kit

Tool Kit

Lens Cloth

Lens Cloth

Screws

Screws

Compatibility

Aircraft this fits

Recommended on Matrice 400. Also compatible with Matrice 350 fleets — we confirm mount and endurance on the quote.

All drone payloads

Next step

From raw data to signed-off outputs

Orthos, point clouds, thermal reports, and BIM-ready exports — tell us what you're producing and we'll wire the right capture and processing stack.

We usually reply within a day.