Flagship enterprise drone

DJI Matrice 400 enterprise drone

When the job outgrows everything else. Up to 59 minutes endurance, 6 kg payload and rotating LiDAR for power-line detection. Specced and handed over for the mission, not the brochure.

Same team on support
CASA-aware deployment
Demo before you buy

Explore the DJI Matrice 400

Endurance, payload and sensing for missions lighter airframes cut short. Not sure which kit fits? Ask us.

DJI Matrice 400

Long-range Matrice airframe for heavy payloads.

59 minutes airborne
6 kg on three mounts
Reads wire at 50 m
20 km transmission

The DJI Matrice 400 is the flagship enterprise drone built for tough, high-demand jobs. It offers long flight times, heavy payload support, and advanced safety features—making it perfect for inspections, mapping, public safety, energy work, emergency response, and more. Pair it with essential accessories like powerful payloads, high-capacity batteries, stabilized gimbals, durable propellers, and extras to handle the most challenging missions with ease. With up to 59 minutes of flight time, strong wind resistance, and the ability to carry up to 6 kg of equipment. Its rugged, weatherproof des...

From$22,390 to $53,580

Learn more

59 min

One flight, the whole site

Fifty-nine minutes of endurance over 6 kg of payload means a corridor or a quarry goes down in a single sortie, not three.

50 m wire detection

It sees the wire before you do

Rotating LiDAR and six-direction mmWave radar pick up a 21.6 mm conductor at 50 m, so the aircraft holds its line through infrastructure.

0.1 m hover accuracy

Comes home when the sky closes in

Vision, LiDAR and satellite positioning fuse into one solution, so a return to home under a bridge deck or beside a stockpile still lands where it should.

40 km

Forty kilometres of link

O4 Enterprise Enhanced with sub-2G carries three 1080p channels back to the controller. That is what keeps a long corridor job as one flight instead of three drives.

Ground Truth

Compare

How it compares

Side by side on sensor, range, cameras, shutter and RTK.

Spec	DJI Zenmuse L3	DJI Zenmuse P1	DJI Zenmuse H30T	DJI Zenmuse H30
Sensor type	—	Full frame CMOS	—	—
LiDAR sensor	1535 nm long range, Class 1 eye safe	—	—	—
Cameras	Dual 100 MP 4/3 CMOS RGB mapping cameras	—	Wide, zoom, thermal, laser rangefinder and NIR auxiliary light	Wide, zoom, laser rangefinder and NIR auxiliary light
Resolution	12288 × 8192 per camera	45 MP	40 MP stills, 4K/30 video	40 MP stills, 4K/30 video
Range (10% / 80% reflectivity)	950 m at 10%, 2000 m at 80%	—	—	—
Zoom range	—	—	34x optical, 400x hybrid	34x optical, 400x hybrid
Thermal resolution	—	—	1280 × 1024, 32x digital zoom	—
Temperature measurement range	—	—	-20 °C to 550 °C, to 1600 °C with the infrared density filter	—
Laser rangefinder	—	—	3 m to 3000 m	3 m to 3000 m
Shutter	—	Mechanical central leaf, plus electronic	—	—
Absolute accuracy	3 cm vertical, 4 cm horizontal RMSE at 120 m	3 cm horizontal, 5 cm vertical	—	—
Ground sample distance	—	3 cm at typical mapping altitude	—	—
Coverage per day	Up to 100 km² per day on the M400	—	—	—
Processing software	DJI Pilot 2, DJI Terra	DJI Pilot 2, DJI Terra	—	—
Weight	1.60 kg, plus 145 g for the gimbal connector	800 g with lens	920 g	920 g
Fits	Matrice 400 on the dedicated L3 gimbal connector	Matrice 400, Matrice 350 RTK, Matrice 300 RTK	Matrice 400, Matrice 350 RTK, Matrice 300 RTK	Matrice 400, Matrice 350 RTK, Matrice 300 RTK
Ingress protection	IP54	IP4X	IP54	IP54

Payloads, Accessories, & Spares

DJI

DJI Matrice 400 TB100C Tethered Battery

$2,900

DJI

DJI Matrice 400 TB100 Intelligent Flight Battery

$2,400

DJI

DJI Matrice 400 Third Gimbal Connector

$230

DJI

DJI Matrice 400 Gimbal Dampers

$20

DJI

DJI Matrice 400 Dual Gimbal Connector

$390

DJI

DJI Matrice 400 2510F Propellers

$63

DJI

DJI AP100 Parachute for Matrice 400

Enquire for price

Choosing and buying

When does the Matrice 400 make sense over a Matrice 4E?

When the job needs a heavy payload, long endurance with that sensor on board, or a LiDAR accuracy spec the compact platform cannot meet. The M400 carries up to 6 kg, so the Zenmuse L3, P1 and H30T are all viable, at around 59 minutes of measured flight time with a real inspection payload fitted. The M4E still wins on cost per hectare for medium area orthos. Choose the M400 when the tender spec or the payload weight rules the smaller aircraft out.

Which payload should I pair with the M400: L3, P1 or H30T?

Match it to the deliverable. Zenmuse L3 for corridor LiDAR, forestry, mining and powerline work, where you want a colourised point cloud with survey grade vertical accuracy at altitude. Zenmuse P1 for full frame photogrammetry and large ortho blocks over long endurance. Zenmuse H30T when the billable output is visual plus thermal inspection with standoff zoom and a laser rangefinder. We spec the aircraft and the payload together and quote the full build against your tender rather than a catalogue pairing.

What is included when we buy the aircraft through Mirrormapper?

Payload calibration before handover, AUSCORS NTRIP configured on your account, a sample DJI Terra workflow set up against your deliverable type, and hands on training covering aircraft and payload. Warranty runs 12 months and sits under Australian Consumer Law, and the engineers who commissioned the system are the ones who answer when you call from site. The value is in the calibrated stack, not the airframe on its own.

Can we buy the M400 airframe on its own?

Yes, through the Aircraft Only tier: the airframe with RC Plus 2, WB37, propellers, dampers, case and tools. Be clear on what it is not. The M400 ships from DJI without flight batteries and without a charging station, so on its own it cannot fly. That tier is priced for operators adding an airframe to a fleet that already holds TB100 packs and a BS100 station, or replacing an aircraft against an existing spares pool. If this is your first M400, start at Ready to Fly, which adds three TB100 packs and the station. Every payload tier builds on that same flying spine.

We are on the Matrice 350 RTK. Is the M400 upgrade worth it?

Upgrade when the M350 cannot carry the payload, cannot hold flight time with that sensor loaded, or cannot hit the accuracy spec your clients now ask for. The M400 adds a third gimbal connector for the L3, omnidirectional sensing with rotating LiDAR and mmWave radar, O4 Enterprise Enhanced transmission, an IP55 rating and roughly 59 minutes with an H30T class payload. If the M350 still wins the jobs you want at the spec you quote, keep flying it.

Performance and workflow

How long does it fly with a mapping or LiDAR payload on board?

Around 59 minutes, measured with an H30T fitted at sea level in forward flight. That covers a full morning corridor or mapping block without planning the sortie around the battery. Endurance drops with heavier combinations, altitude and wind, so we model flight time against your typical mission profile during the spec conversation. The number that matters is endurance with a billable sensor attached, not an empty airframe figure.

Can the M400 carry more than one sensor in one mission?

Yes. The platform supports multi payload configurations across the third gimbal connector, the dual lower mounts and E-Port V2 accessories. Common pairings are the L3 on the primary connector with a lighter secondary sensor, or the H30T alongside the S1 spotlight and V1 speaker for night public safety work. Total weight and centre of gravity limits apply, so we validate the combination against the mounting rules before your first paid job.

Compliance

Does buying an M400 mean we are CASA-approved to fly it?

No. We provide CASA-aware deployment guidance. Your organisation holds the operator certificate, the licensed remote pilots and the site specific risk assessment. We help with the paperwork for fleet and operational approvals when you are building a programme, and CASA grants the authorisations. Build the regulatory pathway into your rollout timeline alongside hardware delivery.

Support

What warranty and support do I get?

Twelve months of warranty backed by Australian Consumer Law, with phone and email support from the engineers who calibrated your payload and ran your handover. DJI Care Enterprise is available on top for accidental damage cover. This is a production aircraft, so we would rather diagnose a fault with you on the phone than have you waiting on an overseas repair queue.

Built for the missions others can't fly

RTK-configured, payload-calibrated, and mission-ready before it ships. Start with what you're capturing and we'll do the rest.