DJI
DJI Zenmuse L3
Aerial LiDAR for corridors and canopy.
- Long-range LiDAR
- Dual 100 MP
- Canopy coverage
Pay with
-
Setup & training
included -
12-month
Australian warranty -
Express shipping
Australia-wide
950 m
Returns off ten per cent at 950 metres
A 1535 nm laser reaches further and cuts through haze, so the aircraft can sit at 300 to 500 m and still put points on the ground.
107° FOV
Two 100 MP cameras, one pass
Dual 4/3 CMOS sensors behind a mechanical shutter cover 107° across, enough for the orthophoto and the elevation model off the same flight.
Confirm coverage before you leave site
Real-time SLAM draws the cloud on the controller as you fly, so a thin patch gets reflown while the crew is still there.
100 km² per day
One hundred square kilometres in a day
On the Matrice 400 at 300 m, a single flight covers 10 km². Across a working day with battery swaps planned, that is 100 km².
Discover DJI Zenmuse L3
Everything that ships with the kit you select.
Zenmuse L3
Zenmuse Hardcase
Matrice 400 Single Gimbal for Zenmuse L3
2×CFexpress Type B Card (1Tb)
CFexpress Type B Card Reader
Zenmuse L3 Lens Cap
L3 Insert for M400 Case
Zenmuse L3 Gimbal Dampener Pack
Tool Kit
Lens Cloth
Screws
| LiDAR sensor | 1535 nm long range, Class 1 eye safe |
|---|---|
| Cameras | Dual 100 MP 4/3 CMOS RGB mapping cameras |
| Resolution | 12288 × 8192 per camera |
| Range (10% / 80% reflectivity) | 950 m at 10%, 2000 m at 80% |
| Absolute accuracy | 3 cm vertical, 4 cm horizontal RMSE at 120 m |
| Coverage per day | Up to 100 km² per day on the M400 |
| Processing software | DJI Pilot 2, DJI Terra |
| Weight | 1.60 kg, plus 145 g for the gimbal connector |
| Fits | Matrice 400 on the dedicated L3 gimbal connector |
| IP Rating | IP54 |
Compatibility
Aircraft this fits
Recommended on Matrice 400. Also compatible with Matrice 350 fleets — we confirm mount and endurance on the quote.
Not sure which kit fits the job?
Tell us the site and the deliverable. We'll name the kit, the price and the lead time.
Open a real scan